Pages Navigation Menu

Long Beach Electronic Cigarette & E-Juice Vape Store

Joyetech eGo-T 650mAh Upgrade P/T Battery

Available in Store
blue, copper, green, pink, purple, red, stainless, titanium, white
Price: $22.93

Add to Cart

Joyetech eGo-T 650mAh upgrade USB battery /USB passthrough.

A fully charged Joyetech eGo-T 650mAh USB battery can support a heavy vaper at least 6 hours!

The eGo-T standard battery has internally installed charging chips with Mini-USB port on the bottom to charge the battery through USB cable connected with USB port of the computer or wall charger.

Joyetech eGo-T 650mAh USB battery /USB passthrough comes in 10 colors.

Although the 650mAh Joyetech eGo-T 2 upgrade USB battery is sealed to prevent being spoiled by e-juice or e-liquid, keep the batteries dry and away from moisture.

 

Joyetech eGo-T 650mAh upgrade USB battery parameters

  • Capacity:  650mAh
  • Length: 3.35 in (85mm)
  • Diameter:  0.59 in (15mm)
  • Weight: 3.17 oz (90.0g)
  • USB cable length:  5.7 in (146mm)
  • 2 switch modes
  • Cutoff time: 10 seconds
  • 5-click protection
  • Colors: black, blue, copper, green, pink, purple, red, stainless steel, titanium, white

5-click protection function

1. Joye eGo-T upgrade USB battery has 5-click protection function. Generally, the battery is shipped in the OFF position. In the off position, the eGo-T battery will not function even when pressing the button.

2. To turn on the battery, press the manual button 5 times within 2 seconds. You will see the white LED flash.

3. To turn off battery, press the manual button 5 times within 2 second as well, the white LED will flash!

4. "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket! It can work with Joye eGo-C/eGo-T/eGo/510/510-T atomizers!

 

2 switch modes

The biggest improvement of the Joye eGo-T upgrade USB battery is that it has two switch modes. One is the constant voltage output mode, which gives constant 3.3V (when it's driving the atomizer), and is the same as the normal eGo-T battery.

The other mode is variable voltage output mode, when the voltage changes from 4.15V to 3.6V as the lithium battery power decreases. With higher voltage up to 4.15V, this give you a better vapor feeling.

 

Parameters

  • Capacity:  650mAh
  • Length: 3.35 in (85mm)
  • Diameter:  0.59 in (15mm)
  • Weight: 3.17 oz (90.0g)
  • USB cable length:  5.7 in (146mm)
  • 2 switch modes
  • 5-click protection
  • 10 seconds cutoff time

When your USB battery is completely out of power, it will show red LED in the end of battery when you charge, but if there is any power, there is no LED display during charge.

 

Colors

  • black
  • blue
  • copper
  • green
  • pink
  • purple
  • red
  • stainless steel
  • titanium
  • white

Charging the battery

1. The protection switch has the lock/unlock function, making it safer and easier to use and this can prevent accidental battery discharge when not in use.

2. On the end of the battery,  there's the USB port, which can connect to a USB connect line for charging. Meanwhile, you can charge by using the ordinary USB cable charger as well.

3. Battery can be easily charged with the assorted USB chargers and there are various chargers for your choices.

4. Screw battery into the hole on the atomizer and gently push the tank cartridge into the atomizer, then it's ready for use.

ego-t_650_usb_battery8

Joye 650 usb battery_usb_650.2

Switching operation

 

From constant voltage output mode to new battery voltage voltage output

1. When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).

2. By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).

3. Then click the button for 5 times, then you can smoke in battery voltage output.

4. In new battery voltage output mode, the LED is orange.

5. When charging, orange LED will blink 5 times in this new mode.

 
From new battery voltage output to constant voltage output mode:

1. In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).

2. By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.

3. Then click the button for 5 times, then you can smoke in 3.3V constant voltage.

4. In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.

5. When charging, white LED blinks 5 times in this new mode.