Pages Navigation Menu

Long Beach Electronic Cigarette & E-Juice Vape Store

Joyetech eGo-T 1000mAh Upgrade P/T Battery

Available in Store
black, copper, green, pink, purple, red, stainless, titanium, white steel
Price: $27.72

Add to Cart

Joyetech eGo-T 1000mAh upgrade USB battery/USB passthrough .

A fully charged Joyetech  eGo-T 1000mAh battery can support a heavy vaper at least 10 hours!

The eGo-T standard battery has internally installed charging chips with Mini-USB port on the bottom to charge the battery through USB cable connected with USB port of the computer or wall charger.

Joyetech eGo-T 1000mAh upgrade USB battery comes in 10 colors.

Although the 1000mAh Joye eGo-T USB battery is sealed to prevent being spoiled by e-juice or e-liquid, keep the batteries dry and away from moisture.

 

Joyetech eGo-T 1000mAh upgrade USB battery parameters

  • Capacity: 1000mAh
  • Length: 4.25 in (108mm)
  • Diameter: 0.59 in (15mm)
  • Weight: 3.5 oz (100g)
  • USB cable length: 5.7 in (146mm)
  • 2 switch modes
  • Cutoff time: 10 seconds
  • 5-click protection
  • Colors: black, blue, copper, green, pink, purple, red, stainless steel, titanium, white

5-click protection function

1. Joye eGo-T upgrade USB battery has 5-click protection function. Generally, the battery is shipped in the OFF position. In the off position, the eGo-T battery will not function even when pressing the button.

2. To turn on the battery, press the manual button 5 times within 2 seconds. You will see the white LED flash.

3. To turn off battery, press the manual button 5 times within 2 second as well, the white LED will flash!

4. "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket! It can work with Joye eGo-C/eGo-T/eGo/510/510-T atomizers!

2 switch modes

The biggest improvement of the Joye eGo-T upgrade USB battery is that it has two switch modes. One is the constant voltage output mode, which gives constant 3.3V (when it's driving the atomizer), and is the same as the normal eGo-T battery.

The other mode is variable voltage output mode, when the voltage changes from 4.15V to 3.6V as the lithium battery power decreases. With higher voltage up to 4.15V, this give you a better vapor feeling.

Parameters

  • Capacity: 1000mAh
  • Length: 4.25 in (108mm)
  • Diameter: 0.59 in (15mm)
  • Weight: 3.5 oz (100g)
  • USB cable length: 5.7 in (146mm)
  • 2 modes to switch
  • 10 seconds cutoff time
  • 5-click protection

When your USB battery is completely out of power, it will show red LED in the end of battery when you charge, but if there is any power, there is no LED display during charge.

Colors

  • black
  • blue
  • copper
  • green
  • pink
  • purple
  • red
  • stainless steel
  • titanium
  • white

Charging the battery

1. On the end of the battery, there's the USB port, which connects to a USB connect line for charging.  You can charge the battery by using the ordinary USB cable charger as well.

2. The USB port can be connected to a USB cable, and you can enjoy your e-cig at the same time when it is being charged

3. The battery contains a microchip to prevent overcharging. When fully charged it automatically switches off.

4. 1000mAh large USB battery is much more powerful than conventional batteries.

Joye battery_usb_1000

Joye battery_1000

Switching operation

 

From constant voltage output mode to new battery voltage voltage output

1. When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).

2. By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).

3. Then click the button for 5 times, then you can smoke in battery voltage output.

4. In new battery voltage output mode, the LED is orange.

5. When charging, orange LED will blink 5 times in this new mode.

From new battery voltage output to constant voltage output mode:

1. In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).

2. By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.

3. Then click the button for 5 times, then you can smoke in 3.3V constant voltage.

4. In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.

5. When charging, white LED blinks 5 times in this new mode.